Battery Powered LED Strip Lights, Wireless RGB LED Strip Lights with 24 Keys Remote Control, for Kitchen Under Cabinet Lighting, Shelves, Under Counter, Closet, Cordless Click Light
Battery Powered LED Strip Lights, Wireless RGB LED Strip Lights with 24 Keys Remote Control, for Kitchen Under Cabinet Lighting, Shelves, Under Counter, Closet, Cordless Click Light
SKU:TEEB0D6W9NN6D
Couldn't load pickup availability
-
The most common problem is that the product cannot work and cannot light up. What could be the reason for this?
Check the connection between the terminal interface of the light strip and the terminal interface extended from the battery box. Carefully observe the obvious "→" on the terminals, and adjust their defense lines to "→ ←" before connecting.
-
If the terminal connection is correct, the product still cannot be controlled?
The product has a memory function. If you turn off both the remote control and the switch on the battery box when you are not using it, you must first turn on the power on the battery box before you can control it freely. This is a prerequisite.
-
Is the remote control not functioning properly? Is it broken or something else?
The product is very mature and widely used, but you may not have taken out the battery insulation at the bottom of the remote control, that's all.
-
If the light strip gets stuck in one color or the remote control cannot control it? What should I do if I don't obey?
Don't worry, it's possible that your battery is running low. Please replace it with a new one and try again in a timely manner.
-
The back glue is really garbage. If it doesn't stick, what should I do?
The product is very lightweight and can be fixed with only a small amount of adhesive. The back glue must be pasted on a smooth surface, otherwise it will result in insufficient adhesion performance and fall off.
Matters Needing Attention:
Please make sure both allows corresponding first and then connect them together Introduction to the functions of the remote control.
-
Does the remote control still not work after replacing the battery of the strip light?
You can directly disconnect the connection wires between the battery box and the strip light. Do not turn off the power when disconnecting, and then press the "RED" button on the remote control to reconnect the wires. The remote control can now work.
-
After the first use of the product, will it no longer work when used again?
1. Ensure that the switch on the battery box is in the open state. 2. Ensure that the terminal interface is not loose or dropped. 3. When ensuring sufficient battery power, turn on the battery box switch and then control it with the remote control.
-
The light strip is not long-lasting and is very easy to fall off.
Ensure that the back adhesive of the light strip is adhered to a smooth surface, then use the configured white back adhesive to stick it to the battery box, ensuring that the adhesive positions of both are not pulled or tight.
-
The remote control is not working or the control effect is poor.
The remote control belongs to infrared control. When controlling, make sure there are no obstructions. Try controlling it up close and aim it at the controller for better results.
Product Information
🔴Multicolor changing: the RGB LED strip lights kit has not only RGB(Red, Green, Blue), 16 multicolored options, but also DIY selection, which makes more vibrant for Christmas decorations. 🟠Bright LED Lights: The 3 Pre-cut strip lights uses SMD 5050 4 Colors in 1 LEDs (included RED, Green, Blue, and White), which are brighter and more efficient. Our Multi-Colored LED shelves backlight are the best choice for home accent lighting, DIY decorative or commercial use. 🟡RGB LED Strip Kit: 3-Pack RGB led strip lights with remote for wall mounted floating shelves,Shelf decorative lighting, 3xAA battery powered. (Batteries Not Included) 🟢Remote control: 24-key IR remote allows you to choose colors, adjustable brightness and multiple lighting modes to fit room mood. (remote range: 10m) 🟣Easy to install: with back adhesive and flexible strip design, it can stick on any dry and flat surface. Note: use the packaged adapter to meet working power requirement.
Features & Specs Indoor Outdoor Usage Indoor Additional Features Remote Controlled, Dimmable, Color Changing Light Source Type LED Power Source Battery Powered Light Color Multicolor Controller Type Remote Control Voltage 5 Volts Bulb Shape Size S6 Wattage 7.2 watts Control Method Remote Water Resistance Level Not Water Resistant Number of Batteries 1 Lithium Ion batteries required. (included) Style Color RGB 3Pack Theme DIY Decoration Occasion Christmas, Thanksgiving, Halloween, Party Product Style LED Strip Lights Measurements Number of Light Sources 30 Item Weight 0.16 Kilograms Number of Items 3
